home *** CD-ROM | disk | FTP | other *** search
- Path: pc33-247.hiof.no!haraldk
- From: haraldk@sofus.hiof.no (Harald Kuhr)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CV64
- Date: Wed, 17 Jan 1996 10:21:45 GMT
- Organization: Ostfold College
- Message-ID: <haraldk.30.30FCCDB9@sofus.hiof.no>
- References: <496.6583T1104T2214@login.eunet.no> <50077651@wbmt41.wbmt.tudelft.nl>
- NNTP-Posting-Host: pc33-247.hiof.no
-
- In article <50077651@wbmt41.wbmt.tudelft.nl> "Marcel Offermans" <marcel@wbmt41.wbmt.tudelft.nl> writes:
-
- Maybe you have solved this problem already, but... :)
-
- > > Just got my CV64 board.
- > > My problem is that when i start the cybervisin program from
- > > devs/monitors the machine hangs up and i get a GURU 80000004 deadend
- > > great.
-
- I had this same problem, and I have heard about others too.
- I think that some of the CV monitor files sold with the latest cards are
- faulty. It didn't even run on a standard A3640 (?).
-
- All I did to fix the problem was to get an old monitor file from a friend.
-
- > > I have speedup my machine to 33mhz, could this be the problem?
-
- I have a CyberStorm 040/40 mhz, and it WORKS, I don't think this is the
- problem.
-
- [Trouble shooting from CV manual cut]
-
- >If, like you stated, you have made sure that you have the latest software
- >drivers and that that's not the problem, then you should IMHO try to put
- >the motherboard back to 25MHz.
-
- Try to get an older monitor file, before doing anything with your hardware.
-
- Hope this helps!
-
-
- -----------------------------------------------------------
- Harald Kuhr
- Email: harald.kuhr@hiof.no WWW: http://www.hiof.no/~haraldk
-